Furnace Not Working? 7 Quick Fixes to Try Before You Call a Contractor

When your furnace suddenly stops working on a chilly Roachdale night, panic can set in quickly. Before you rush to call a professional, there are a few simple troubleshooting steps you can try that may save you time and money. As your trusted Roachdale HVAC professionals, Muse Heating And Cooling is here to help you figure out what's wrong and possibly get your system back up and running without a service call.

1. Check Your Thermostat Settings

It might sound obvious, but thermostats are one of the most common reasons for heating issues. Make sure your thermostat is set to “Heat” and that the temperature is set higher than your current room temperature. If it runs on batteries, replace them to rule out power issues.

2. Inspect the Furnace Power Switch

Your furnace has a power switch that looks like a regular light switch, usually located nearby. Sometimes it can get flipped off accidentally during cleaning or other home activities. Make sure it's turned on before you do anything else.

3. Look at the Circuit Breaker

Go to your home's electrical panel and check the breaker connected to your furnace. If it's tripped, flip it fully off and then back on. A tripped breaker can easily interrupt power to your heating system.

4. Check the Air Filter

A dirty air filter can restrict airflow, causing your furnace to shut down or blow cold air. Replacing the filter is one of the simplest and most effective maintenance steps you can take. If you haven't changed it in over a month, it's time to do so now.

5. Make Sure the Gas Supply Is On

If your furnace runs on natural gas, ensure that the gas valve is open. The valve handle should be parallel to the gas pipe. If it's perpendicular, the gas supply is off. Always exercise caution when dealing with gas appliances. If you smell gas, turn it off immediately and call for professional help.

6. Clear the Furnace Vents and Intake Pipes

Outdoor vents and intake pipes can become clogged with debris, snow, or ice, especially during winter. These blockages prevent proper airflow and can cause your furnace to shut down as a safety measure. Check that these areas are clear and unobstructed.

7. Reset the Furnace

Many modern furnaces have a reset button, typically located near the blower motor. If your system isn't responding, press the reset button once and wait a few minutes. Avoid pressing it multiple times, as this can cause further issues.

Quick Fix Checklist

• Thermostat set to “Heat” and batteries working
• Power switch turned on
• Circuit breaker reset
• Air filter replaced
• Gas valve open
• Vents and intakes are clear
• Furnace reset once

When Simple Fixes Aren't Enough

If none of these steps restore your furnace, it's time to contact Muse Heating And Cooling for professional help. Persistent issues may point to more serious problems like a faulty ignitor, malfunctioning blower motor, or electrical failure.

Don't let furnace problems leave you in the cold. Call Muse Heating And Cooling today at 765-522-4716 for fast, reliable heating repairs and expert service you can trust. Our skilled technicians are ready to restore warmth and comfort to your home. Contact us now and get your furnace running like new.